Earthing & Bonding (E&B) Management

We are one of the world’s leading experts in Earthing & Bonding Management and also known for our specialization in Earthing System design. Our Solutions yields effective electrical earthing and bonding. It ensures the health of your industry is maintained at its highest standard.

Effective Electrical Earthing Systems

  • Safety to operators by maintaining low potential at the time of fault
  • Return path for fault current to timely activate protection systems
  • Shield from radiated and conducted fields
  • Equipotentiality at the time of fault
  • A path to dissipate energy from external source without creating stress in the system
  • Reference for protection & operating systems

Earthing System Solutions

A detailed and meticulous procedure is followed to construct an effective earthing system.

Health Assessment & Audit

Earthing and bonding audit is a periodic requirement for every industrial and commercial establishment. It ensures the system is up to date, allowing the establishment to hold high standards in terms of electrical safety and reliability.

Process of assessment and audit:
  • Physical Inspection: As per International and national standards the physical health of the system is assessed.
  • Comparative study: The present system is compared with the initial design criteria.
  • Residual Life Analysis: Lifespan of each component in the system is analysed to determine deterioration.
  • Maintenance practice: The existing maintenance practice is reviewed. If required, changes are suggested depending on the outcome of the previous steps.
  • Mitigation: Easy, economical and implementable solutions are provided that the maintenance department can adapt and reduce the deviation from initially designed earthing system criterias.

Tests & Measurements

We conduct the following tests and measurements:

  • Visual Assessment of Earthing Philosophy
  • Riser integrity Measurement
  • Earth Fault Loop Impedance Measurement
  • Soil Resistivity Measurement
  • Earth Grid & Pit Resistance Measurement
  • Touch and Step Potential Measurement
  • Buried Earth Conductor Corrosion Measurement

Design, Simulation and Modelling

Product Supply

Curec+™

World’s Best Permanent Earth Enhancing Compound

  • Conforming to IEEE 80 2013 Clause 14.5 (d)
  • Conforms to IEC 62561 Part 7
  • Provides permanent solution to reduce soil resistivity
  • Electrically & Thermally conductive
  • Least Corrosive
  • Non-Leaching
  • Permanent in nature
  • Eco Friendly
  • Soil Resistivity value have seasonal variation of ± 10%
  • Customize packaging available. Standard 3 KG bags

Curecon™

Maintenance Free Earth Enhancing Compound

  • Conforming to IEEE 80 2013 Clause 14.5 (b)
  • Conforms to IEC 62561 Part 7
  • Lowers soil resistivity
  • Electrically conductive
  • Slows rate of corrosion
  • Non-Leaching
  • Maintenance free up to 8 years
  • Eco Friendly
  • Conforms to IEC 62561 Part 7
  • Soil Resistivity value have seasonal variation of ± 35%
  • Customize Packaging Available. Standard 5 KG bags

Curenite™

Non-Cracking Electrical Grade Bentonite

  • Conforming to IEEE 80 2013 Clause 14.5 (b)
  • Improves soil Conductivity
  • Electrical Grade Bentonite
  • Eco Friendly
  • Slow Corrosion
  • Non -Leaching
  • Not a maintenance Free product
  • Soil Resistivity value have very high seasonal variation
  • Customize Packaging Available. Standard 25 KG bags
  • Driving Stud

  • Earth Bar With Double Disconnecting Link

  • Earth Bar With Single Disconnecting Link

  • Earth Bar Without Disconnecting Link

  • Earth Mat (GI Mesh)

  • Earth Mat (Copper Mesh)

  • Earth Plate (GI)

  • Earth Plate (Solid Copper)

  • Heavy Duty Electrode Coupler

  • High Density Polypropylene (HDPE) Inspection Chamber

  • Cast Iron Inspection Cover

  • Pre-casted Concrete Inspection Cover

  • Internal Coupling Dowel

  • Molecularly Bonded Copper Over Steel Earth Plate

  • Molecularly Bonded Copper Over Steel Earth Rod

  • Solid Copper Earth Rod

  • Threaded Copper Bonded Earth Rod

  • Unthreaded Copper Bonded Earth Rod

Installation & Commissioning

Before project installation, we perform site survey to understand the real-time scenario of the project site. We also perform some basic tests to gauge the change in the system that would have occurred between contract finalization. After installation, we perform pre-commissioning Test & System Validation to check the system state from it’s designed criteria. On completion of this validation test, we commission the system such that if performs as intended in the given environment.

1
Survey
2
Install
3
Test
4
System Validate
5
Commission

Service for Existing Asset

  • Rejuvenation of degraded earthing system
  • Grid Integrity Correction
  • Corrections in primary and secondary earthing connections

Service for New Asset

  • Equipotential bonding at floor level
  • Equipotential bonding of piles
  • Peripheral earth ring and earth pit creation

We house Installation experts who are proficient installers in explosive Zones, Hazardous Areas, High-Rise Structures, Tank Farms, Vessels, High-Tension Zones, Under the Sea and many such Mission Critical Areas.

Standards